Controls Guide: Dozer, Loader & Hauler

Learn how Dirt Town controls work across the dozer, wheel loader, and hauler, plus practical tips for digging, hauling, and building roads that hold.

How Dirt Town Controls Split Into Layers

Dirt Town hands you a dozer, a wheel loader, and a hauler, then refuses to hold your hand: every bucketful of soil you move stays exactly where you left it. That permanence is why Dirt Town controls matter more than in a typical sim — a sloppy blade pass becomes a road you have to drive on for the rest of the save. Learning the input layers early means you spend sessions building instead of fighting your own machine.

This guide breaks down how Dirt Town controls map onto each vehicle, what to check before your first scoop, and the habits that keep a haul road from collapsing under a loaded truck. Nothing here replaces the game's own menu — but it will tell you what to look for and why each input matters.

Every machine runs through the same four layers of input. Once you can name the layer you're struggling with, fixing it gets much easier.

Control layerWhat you're adjustingWhy it decides the outcome
Travel and steeringThrottle, direction, articulationYou must line up before metal touches dirt; a crooked approach forces corrections mid-cut
ImplementBlade height and tilt, bucket curl and lift, bed raise and lowerSets cut depth, how much load you keep, and how evenly material spreads
Material responseMoisture, packing, slope, layeringDetermines grip and whether your pile stays a pile or slides into your own tracks
Camera and viewAngle, height, distanceYou cannot grade a surface you cannot see; the blade edge is your reference line

The demo supports a gamepad but does not require one, so keyboard and mouse is a fully supported way to play. Public demo details don't publish a printed key map, and the build's performance is still being optimized. So the first productive step is opening the in-game settings and control menu and noting your own mapping for blade up and down, bucket curl, and bed raise. Ten minutes of setup saves hours of guesswork.

Because the demo is a small map with a short list of missions, you can drill each layer in a low-stakes setting before you commit to a long save.

Dozer, Loader, and Hauler: Which Controls You'll Lean On

Each vehicle rewards a different kind of precision. Treat them as three separate control disciplines rather than one generic "driving" skill.

VehicleControl focusBest useWatch out for
DozerBlade height and tilt, paired with slow, steady travelCutting, pushing, rough grading, stacking material into workable pilesDigging in too deep and stalling; leaving a windrow the hauler can't climb over
Wheel loaderBucket curl timing and lift heightScooping, filling the hauler, relocating stockpilesScooping a half bucket; dumping from height and scattering the load
HaulerBed raise and lower, plus deliberate line choiceMoving sand and soil, testing whether a road holdsOverloading soft ground; tipping on ungraded fill
Hidden vehicleUnknown until you find itA bonus, not a planBuilding a strategy around a machine you haven't located yet

Three habits make the biggest difference with Dirt Town controls across all of them:

  • Set your cut depth before you apply throttle. Lower the blade or bucket while stationary, then move. Adjusting on the roll is how you bog a machine down.
  • Make one clean pass instead of five panicked ones. A steady, shallow cut leaves a surface the hauler can actually use.
  • Look behind you as often as ahead. The pile you pushed is now an obstacle for every vehicle that follows.

Before Your First Scoop: A Five-Minute Setup

Most "control problems" are actually setup problems. Work through this list before you touch the terrain.

CheckWhy it mattersWhat good looks like
Pick one input device and stay with itSwitching between keyboard and gamepad mid-save destroys the muscle memory that governs blade depthOne device for the whole session
Confirm the camera bindingsCamera control is separate from steering and easy to overlookYou can swing the view without moving the machine
Note your implement keysBlade, bucket, and bed inputs are the ones you'll hit mostAll three written down or memorized
Lock your frame rateStutter reads like a laggy control response and makes fine grading feel randomA steady frame rate, even at lower settings
Clear a working lane firstRocks and trees push back on dirt and vehicles alikeA clean path between your cut and your dump

Performance matters here more than in most sims, because the feedback you're reading is physical. The demo lists these targets:

ComponentMinimumRecommended
OSWindows 10 64-bit (1809+), or macOS 14 Sonoma on Apple siliconSame
CPU6-core 64-bit with AVX2, 3.5 GHz8-core 64-bit with AVX2, 4 GHz
RAM16 GB16 GB
GPUNVIDIA RTX 3060 or AMD RX 6600NVIDIA RTX 4070 or AMD RX 7800 XT
Apple siliconM2 Pro or later (Intel Macs not supported)M4 Pro or later
Storage500 MB500 MB

If your rig sits near the minimum, drop visual settings until the frame rate is flat. A steady low setting teaches you more about Dirt Town controls than a stuttering high one.

Reading the Ground: Controls for Dirt That Stays Put

The whole site is one continuous simulation, and your save keeps every change. That single rule reshapes how you should think about inputs.

Simulation behaviorHow it changes your inputsPractical habit
The world is layered with different materialsSand and soil behave differently in every way, so a cut depth that works in one can stall you in the otherMake a light test pass before committing to a full blade load
Moisture affects grip and how dirt movesWet ground punishes aggressive throttle and sloppy blade anglesSlow down and take shallower cuts when the ground feels soft
Water flowsRivers carve and carry; the demo's river crossing is a real obstacleDon't run a haul route along the waterline and expect it to survive
Nearly everything is destructibleSome obstacles simply take far longer than othersChoose targets that pay off instead of grinding on the toughest ones
Rocks and trees interact with dirt and vehiclesThey redirect pushes and can bury a bladeClear the lane before you start loading

The demo leans on this heavily: you're asked to build a road to find sand, then haul that sand to see whether your road can take the weight. Those two objectives are pure Dirt Town controls tests — one grades, the other loads.

The same physics applies to pushing, hauling, and riding dirt alone or with friends. In co-op, agree on who grades and who hauls before anyone drops a blade; two machines cutting the same lane tends to produce a surface neither of you can drive on.

Demo Objectives, Mapped to Your Controls

The demo's mission list is short, and each task isolates a different control skill. Here's how to approach them in order.

ObjectiveControls to focus onWhat success looks like
Build a road to find sandDozer blade height and tilt, steady travel speedA graded, drivable lane rather than a churned trench
Haul sand and see if your road handles itLoader bucket curl and lift, then hauler line choiceA full load that reaches its destination without the surface failing
Find the hidden vehicleCamera work and patient explorationYou locate it — expect it to behave unlike the three you already know
Jump across the riverTravel input, approach angle, and terrain readingA committed run-up over ground you've already compacted

A few control-specific pointers for that list:

  1. Grade wide, not deep. One blade-width pass at shallow depth gives the hauler a usable surface; a deep trench in the middle of the lane is a trap you built yourself.
  2. Load from the stockpile, not the road. Scooping out of your own haul route undoes the grading work you just paid for in fuel and time.
  3. Test the road light before you test it heavy. Run the hauler empty first. If the surface gives way unloaded, it will not survive sand.
  4. Compact your run-up. The river jump depends on speed and grip, and loose fill robs you of both.

If something still feels wrong, revisit the layer you're fighting: travel, implement, material, or camera. Nearly every failure traces back to one of those four, and identifying it beats randomly changing keybinds.

Frequently Asked Questions

Do I need a gamepad to get comfortable with Dirt Town controls? No. The demo lists gamepad support as optional, which means keyboard and mouse is a complete way to play. Choose one device and stick with it so your sense of blade depth stays consistent.

Which vehicle should I learn Dirt Town controls on first? Start with the dozer. Blade height and tilt give you immediate, visible feedback, and grading a lane teaches you how the terrain responds before you add the complexity of loading and hauling.

Why does my hauler keep sinking or sliding? Almost always because of the surface underneath it. Moisture changes grip, sand behaves nothing like soil, and an ungraded road will not carry a loaded bed. Grade shallow, grade wide, and test the route empty before hauling sand.

Can I learn Dirt Town controls without ruining anything permanently? The whole site is one simulation and your changes persist in your save. That permanence is the appeal, but it also means your first road is a draft. Keep early projects small, work near your starting area, and treat mistakes as terrain you'll fix later with the same controls that caused them.